The Automatic PVC Banner Welding Machine is specially used to weld large format outdoor spray painting cloth, photo cloth, posters, light box cloth , tarpaulin , tent , pvc/pu/pe and other plastic materials that can be hot melt . Simple operation and high efficiency.
Advantages:
● With sensor in the welder nozzle, can control the work temperature accurately.
● Use hot air to weld materials, low cost.
● Automatic work , work speed , temperature and fan motor speed are adjustable.
● Body is Steel and wheels is aluminum, very strong.
● Light weight, easy to carry and operate.
● Application for PVC, PE and other plastic material that can be hot melt.
● It can operate continuously for 8 hours.
● With CE, RoHS Certificates and one year warranty period, free replacement parts.
Specificate:
Model: LC-3000A
Power: 1300W
Voltage: 110V/220V
Seam width: 2-4cm
Seam thickness: 0.1-1mm
Speed: 1-15m/min
Temperature: 0-620 degree
Wheels: Aluminum
Certificate: CE, ROHS
Warranty period: One year
Display screen: LED
Weight: 14kg
Dimension: 49*30*29cm
Package: Carton box with foam
Operation steps:
◆ Make the cloth for seaming flat and put it underneath.Fix both ends by adhesive tape or something else.
◆ The overlap width of the two pieces is about 3 mm, the width of the nozzle of hot seaming machine.
◆ Put the machine nozzle between two overlap pieces. The press wheel should be at left side of nozzle.The nozzle also need align with side of upper piece of cloth.
◆ Switch on the motor power and then adjust speed.
◆ Turn on the movement switch. Press heating power key to adjust temperature.
◆ Turn the bar by anticlockwise to fix the position to startup automatic movement.The machine will go along with the overlap path by itself.
◆ Turn the bar by clockwise to cease the automatic work.
◆ The operator should control the moving direction and make sure the nozzle connect both with upper and under piece cloth.