Mingyang DX5/DX7 print head cleaning machine is the professional model, it has both the pressure cleaning and ultrasonic cleaning, and also has anti-pumping function, it has 8 channel pipes, special use for DX5 and DX7 print heads cleaning. Usually it can be clean in a few minute and back to work again like usual before it was. To make period of cleaning process to print head is very important, because this can protract the life of print head much longer, and decrease the waste for print head clog, save printing cost.
Voltage: 220V / 110V
Frequency: 50-60 HZ
Warranty period: one year
Cleaning type: Ultrasonic cleaning, Pressure cleaning, Anti-pumping function
Application: DX5, DX7, XP254, XP600, XP800, WF2510, 4720, 5113...
MOQ: 1 set
Delivery time: In 3-5 working days
● Have both the pressure cleaning and ultrasonic cleaning, and also has anti-pumping function.
● It has 8 channel pipes, special use for inkjet print heads, like: DX5, DX7, XP600, 4720, 5113...
● It can be clean in a few minute and back to work again like usual before it was.
● Protract the life of print head much longer, and decrease the waste for print head clog, save printing cost.
● With CE certificate and one year warranty period, free replacement parts.
a. put cleaning fluid in cleaning fluid tank
b. Adjust the print head shelf to suit for the print head need cleaning, then put the print head in shelf
c. Connect the pipe with print head ink connector
d. Plug power cable, press red button, use ultrasonice to clean it for some seconds at first
e. Press the flush control switch, machine will fill fluid into print head, use pressure cleaning. That moment check the cleaning fluid come out from print head is soigne.
f. After some seconds, stop flush control switch, press the Anti-pumping switch, use pump suck the fluid from print head, suck out the big things can not pumg out from print head nozzle.
g. If the fluid is dirty, change some new fluid do step e and f again. When the fluid come out is clean and soigne, then cleaning is finished