Print Head Cleaner is suitable for many kinds of out door print heads, such as XAAR, SEIKO, SPECTRA, KONIKA etc.
And also can use it for indoor print heads like HP, Canon, Epson etc.
1)Ultrasonic Frequency: 40KHz
2)Voltage of the Power supply: AC220V±10% 50Hz
3)Input Power: 45W
4)Package: carton, 34*27*31cm
5)Net / gross weight: 4.8kg/5.5kg
6)Types of the spray nozzle that can be cleaned: XAAR, SEIKO, SPECTRA, KONIKA, EPSON and HP, Canon print head.
Mingyang print head cleaning machine is the professional model, it has both the pressure cleaning and ultrasonic cleaning functions,
and is suitable for many kinds of print heads, such as XAAR, SEIKO, SPECTRA, KONIKA, EPSON etc. It can be adjustable
the print head shelf to suit for different kind of print head. Usually it can be clean in a few minute and back to work again like usual before it was.
To make period of cleaning process to print head is very important, because this can protract the life of print head much longer,
and decrease the waste for print head clog, save printing cost.
3. User Guide
1) put cleaning fluid in cleaning fluid tank
2) Adjust the print head shelf to suit for the print head need cleaning, then put the print head in shelf
3) Connect the pipe with print head ink connector
4) Plug power cable, press red button, use ultrasonice to clean it for some seconds at first
5) Press the corresponding green button, machine will fill fluid into print head, use pressure cleaning.
That moment check the cleaning fluid come out from print head is soigne.
6) If the fluid is dirty, change some new fluid clean it again. When the fluid come out is clean and soigne,
then cleaning is finished.